Installing A Dimm - DEC Digital PC 3500 System Reference Manual

Main Logic Board Expansion

Installing a DIMM

To install a DIMM, perform the following:
1. Turn off your computer and monitor.
2. Disconnect all external devices, ac power, and monitor power.
3. Remove the outside cover.
4. Align the notches on the DIMM with the key notches in the socket.
5. Insert the DIMM straight down into the socket as shown.
Push down firmly on the DIMM until the two plastic clips snap into place.
6. Replace the outside cover.
7. Connect all external devices and restore power.
4-5