Using the BIOS Setup Utility
Setting Power Management Options
This section describes how to select and set your computer's Power Management
parameters using the BIOS Setup utility.
NOTE
your computer's power management features (Windows 95 only).
Windows NT Workstation does not support power management.
Your computer's BIOS has power management features but
Windows NT Workstation does not support them.
Setting up Power Management
NOTE
BIOS Setup utility apply unless the "Power Savings" field is
Enabled.
To initialize the power management features:
1. Reboot the computer and enter Setup.
2. Highlight the "Power" menu.
3. Highlight "Power Savings."
2-12
: You can use DIGITAL's Power Management utility to set
: None of the power management features available in the