Adding Expansion Boards
Installing Expansion Boards
To install an ISA or PCI local bus expansion board:
NOTE
board's documentation before installing it.
Do not install non-Plug and Play expansion boards until you have
run the ICU to determine what configuration the ICU recommends.
Configure any jumpers on the expansion board and then install the
expansion board.
1. Turn off your computer and monitor.
2. Disconnect all external devices, ac power, and monitor power.
3. Remove the outside cover.
4. For short tower models, you can rotate the disk drives to make the area
more accessible.
5. Unscrew the metal filler plate(s) from the selected expansion slot.
5-6
: Read and fully understand your optional expansion