Displaying The Mstp Configuration - HP 3500 Series Advanced Traffic Management Manual

Multiple Instance Spanning-Tree Operation
Displaying MSTP Statistics and Configuration
HP Switch(config)# show spanning-tree config
Multiple Spanning Tree (MST) Configuration Information
STP Enabled [No] : Yes
Force Version [MSTP-operation] : MSTP-operation
Default Path Costs [802.1t] : 802.1t
MST Configuration Name : 1cc1decfbc80
MST Configuration Revision : 0
Forward Delay [15] : 15
Max Age [20] : 20
| Path
Port Type | Cost
---- --------- + --------- ---- ----- ---- ----- ------ ---- --- ---
1 10/100TX | Auto
2 10/100TX | Auto
3 10/100TX | Auto
. .
7 10/100TX | Auto
Figure 3-23. Example of Displaying the Switch's Global Spanning-Tree Configuration
3-56

Displaying the MSTP Configuration

Displaying the Global MSTP Configuration. This command displays the
switch's basic and MST region spanning-tree configuration, including basic
port connectivity settings.
Syntax: show spanning-tree config
The upper part of this output shows the switch's global
spanning-tree configuration that applies to the MST region.
The port listing shows the spanning-tree port parameter
settings for the spanning-tree region operation (configured by
the spanning-tree < port-list > command). For information on
these parameters, refer to "Configuring MSTP Per-Port
Parameters" on page 3-24.
Syntax: show spanning-tree < port-list > config
This command shows the same data as the above command,
but lists the spanning-tree port parameter settings for only the
specified port(s) and/or trunk(s). You can list data for a series
of ports and port trunks by specifying the first and last port
or trunk of any consecutive series of ports and trunks. For
example, to display data for port A20-A24 and trk1, use this
command: show spanning-tree a20-a24,trk1 config
Per-Port Priority
Prio Admin Auto Admin Hello
rity Edge
128 No
128 No
128 No
. . .
128 No
Global Priority
Switch Priority : 32768
Hello Time [2] : 2
Max Hops [20] : 20
Edge PtP Time
Yes True Global No
Yes True Global No
Yes True Global No
. . .
Yes True Global No
Global Hello Time
Per-Port Hello Time
(Overrides Global Hello-
Time on individual ports.)
Root TCN BPDU
Grd Grd Flt
No No
No No
No No
. . .
No No