N o t e
While providing greater control for implementing QoS policies, classifier-
based QoS policies may override globally-configured QoS settings. For more
information, see "Override of Global QoS Settings" on page 5-82.
Be sure to carefully plan your QoS strategies in advance, identifying the
network traffic that you can globally configure and the traffic on which you
want to execute customized, classifier-based QoS actions.
Globally-Configured QoS
Globally-Configured QoS Feature
UDP/TCP Priority
IP-Device Priority
IP Type-of-Service Priority
LAN Protocol Priority
VLAN-ID Priority
Source-Port Priority
DSCP Policy Table
Queue Configuration
Globally-configured QoS operation supports the following types of packet
classification and traffic marking on outbound port and VLAN traffic. For
information on how to configure and use global QoS settings, see "Globally-
Configured QoS" on page 5-16.
■
Globally configured packet classification criteria include:
•
IPv4 device: source and destination address
•
Layer 2 802.1p priority (VLAN header)
•
Layer 3 protocol (such as ARP, IP, IPX, RIP)
•
Layer 3 IPv4 Type of Service (ToS) byte: IP precedence or DSCP bits
•
Layer 3 IPv6 Traffic Class byte: IP precedence or DSCP bits
•
Layer 4 UDP/TCP application port
•
Source port on the switch
•
VLAN ID
Quality of Service: Managing Bandwidth More Effectively
Default
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Various
8 Queues
QoS Operation
Page
Reference
page 5-21
page 5-32
page 5-40
page 5-53
page 5-55
page 5-62
page 5-90
page 5-97
5-7