Configuring Gvrp On A Switch; Menu: Viewing And Configuring Gvrp - HP 3500 Series Advanced Traffic Management Manual

GVRP

Configuring GVRP On a Switch

2-12
Configuring GVRP On a Switch
The procedures in this section describe how to:
■ View the GVRP configuration on a switch
Enable and disable GVRP on a switch
■
■ Specify how individual ports will handle advertisements
To view or configure static VLANs for GVRP operation, refer to "Per-Port Static
VLAN Configuration Options" on page 1-11.

Menu: Viewing and Configuring GVRP

1. From the Main Menu, select:
2. Switch Configuration ...
8. VLAN Menu ...
1. VLAN Support
Figure 2-4. The VLAN Support Screen (Default Configuration)
2. Do the following to enable GVRP and display the Unknown VLAN fields:
a. Press (for Edit).
[E]
[v]
to move the cursor to the GVRP Enabled field.
b. Use
Press the Space bar to select Yes.
c.
[v]
d. Press again to display the Unknown VLAN fields.