Timer Operations - Sharp FO-2950M User Manual

Timer Operations

Timer Operations
The Timer function allows you to set up a transmission or polling
operation to be performed automatically at a time you specify. Up to
three operations can be set at any one time, and the times they will be
performed can be specified up to one week in advance.
♦ You can use this function to take advantage of lower off-peak tele-
phone rates without having to be there when the operation is per-
formed.
Note: Only a Rapid Key or Speed Dial number can be used to dial the
receiving machine. Full numbers cannot be used.
Setting a timer operation
1
If this is a transmission, load the
document.
2
Press these keys:
The display will show:
TIMER MODE
1=SET, 2=CLEAR
3
Press 1 to select SET.
4
Press 1 to set a transmission operation
(SEND MODE), or 2 to set a polling
operation (POLLING MODE).
178
FUNCTION
1
1
SEND POLLING
1 or 2