Sharp FO-2950M User Manual page 125

♦ To select one of the following symbols, press the # key or the * key
repeatedly:
. / ! " # $ % & ' ( ) + + , - : ; < = > ? @ [ ] ^ _ ' { | }
(Note: Characters particular to the selected display language will
appear at the end of the symbol list.)
7
Press the START key.
8
Press 1 if the number programmed is
an area code or access code to be used
for Chain Dialling (see Chain
Dialling for area and access codes
below). Press 2 (or START) if the
number is a regular fax or voice
number.
9
Return to Step 3 to store another
number, or press the STOP key to
return to the date and time display.
Chain Dialling for area and access codes
You can also program an area code or access code in a Rapid Key or
Speed Dial number using the above programming procedure. In Step
8, press 1 to set the number as a Chain Dialling number.
Sending a Fax by Automatic Dialling
ON
1 or
Step 3 or
START
OFF
2
STOP
121