Sharp FO-2950M User Manual page 163

Quiet Detect Start Time
This setting can be used to delay the start of the Quiet Detect Time
function. For example, if you want to insert a pause at the beginning
of your answering machine's outgoing message to ensure clear
detection of fax signals, you can use this setting to delay the start of
silence detection so that the pause will not cause the fax to take over
the line.
Quiet Detect Start Timing has been turned off at the factory. If you
want to use this function, turn it on by entering a 2-digit number equal
to the desired number of seconds of the delay. As general guide, the
delay time should be slightly longer than the pause before the
outgoing message.
1
Press these keys:
The display will show:
QUIET START TIME
ENTER (00-15) 00
2
Enter a 2-digit number (from 01 to
15) for the number of seconds of the
delay, or enter 00 to turn off the
function.
3
Press the STOP key to return to the
date and time display.
FUNCTION
4
Optional A.M. Mode Settings
0 4
(Example)
STOP
159