Sharp FO-2950M User Manual page 131

Note:
Direct Keypad Dialling cannot be used to dial a number within the same
PBX as your fax machine. To send a document to a fax machine in your
PBX, use Normal Dialling.
1
Load the document(s). (Note: If
desired, you can load the document
after dialling in Step 2, below.)
• SEND READY will appear in the
display.
• Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric
keys.
• If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
3
Check the display. If the number of
the receiving machine shown is
correct, press the START key.
• If it is not correct, press the STOP
key to backspace and clear one digit
at a time, and then re-enter the
correct digit(s).
Sending a Fax by Automatic Dialling
2 3
4
RESOLUTION
2
5
6 7
(Example)
START
127