Olivetti Fax-Lab 200 Instruction Manual page 45

Table of Contents

Advertisement

RX IN MEMORY
Reception continues in the memory because an error occurred dur-
ing the reception of a document, preventing it from being printed:
check the type of fault on the lower line of the display and correct it.
SYSTEM ERROR NN
A fatal error has occurred on the fax machine: turn the fax machine off
and then on again. If the error persists, turn off the fax machine and
call the Customer Engineering Service.
TX ERROR
The document was not sent correctly: press the
the " " error LED indicator and clear the message from the display,
and then send it again.
WRONG CODE, PRESS
The TAD access code is incorrect: press the
the correct code.
O
THER ACOUSTIC SIGNALS
Short 1-second signal
Transaction carried out successfully.
Intermittent 20-second signal
Prompt to lift the handset to answer a telephone call.
O
THER MESSAGES ON THE DISPLAY
CHECK PRINT OUT
1=EXIT 0=REPEAT
The fax machine has automatically tested the print head nozzles and
printed out the test sheet: check whether the printing quality is accept-
able and make your choice.
CONNECTING
The fax machine is connecting to your correspondent's fax machine.
DIALLING
The fax machine is dialling the number of the correspondent you
called.
DOCUMENT READY
You have inserted the document in the ADF correctly.
LAST TX OK
The last transmission was completed successfully.
LIFT HANDSET
The correspondent has made a talk request: lift the handset to start
the conversation.
You have put a telephone call on hold by pressing the
press the
correspondent.
You have set transmission from the memory.
You have installed a disposable print head for the first time or you
key to turn off
have removed and reinstalled it: select the relevant answer. If you
answer yes but the print head is not new, the fax machine will not
detect the out of ink condition.
You have made a transmission request (Polling reception).
key and type
The fax machine is printing a report or a list.
You have activated the "handsfree" function. Hang up.
The document was received correctly.
You aborted reception by pressing the
The fax machine is saving the pages of the document to be copied.
You have engaged the line by lifting the handset of the telephone
connected.
A document is being sent.
A document is being sent.
You have set transmission at a preset time (broadcast transmission).
Transmission was completed successfully.
You aborted transmission by pressing the
LINE ON HOLD, PRESS HOLD
key again to resume the conversation with the
MEMORY TX
NEW PRINT HEAD?, 1=YES 0=NO
POLL RX: HH:MM
PRINTING
REPLACE HANDSET
RX COMPLETED
RX INTERRUPTED
key.
STORING
TEL CALL
TRANSMITTING
TRANSMITTING....
TX AT: HH:MM
TX COMPLETED
TX INTERRUPTED
key :
key.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-lab 250Fax-lab 200pFax-lab 250p

Table of Contents