Olivetti Fax-Lab 200 Instruction Manual page 38

The display shows the line to which the fax machine was set
to be connected, for example:
PUBL.LINE (PSTN)
Press the |/} keys to set the connection to "private".
From here on, proceed as described in "To set it up for
the first time", section "Preliminary operations".
Having made the settings, press the
your choice and then the
machine to its initial stand-by status.
T /
O ENABLE DISABLE THE STORAGE OF A FREQUENTLY
USED CODE
Until the display shows:
INSTALLATION
Until the display shows:
OTHER CARR.:ON
or
OTHER CARR.:OFF
It depends on the value you selected when setting up the
fax machine.
Press the |/} keys to select the other option.
From here on, proceed as described in "To set it up for
the first time", section "Preliminary operations".
Having made the settings, press the
your choice and then the
machine to its initial stand-by status.
T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that oper-
ates in tone dialling mode and is set up for manual
reception or automatic reception with recognition of the
type of call, whenever there is a call from a correspondent
wishing to send you a document, you can set it to receive
the document by typing the code
operation has the same effect as pressing the
the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
If the fax machine (model without built-in TAD) is con-
nected to an external answering machine, we recom-
mend you choose a different digit from the one used to control
the machine from a remote location.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
30
key to confirm
key to return the fax
key to confirm
key to return the fax
* *
on the extension. This
key on
The display shows the line to which the fax machine was set
to be connected, for example:
PUBL.LINE (PSTN)
Until the display shows:
REMOTE START:ON
The display shows the code you set previously, for exam-
ple:
TYPE CODE
CODE(0/9,*) *8
Type the new code, for example: "*9".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
N O T E
If you want to disable this function, after the fourth step, press
the |/} keys to display: "REMOTE START:OFF", then press
the key to confirm and the
machine to the initial stand-by mode.
T /
O ENABLE DISABLE RECOGNITION OF THE RING
FREQUENCY
In some countries, local telephone companies offer the pos-
sibility of assigning the same telephone line two or
more numbers, corresponding to different users. When
an incoming call is received, a different ring frequency
will indicate which user is to answer the call.
This function is extremely useful in the home or small offices,
where the same telephone line is shared by more than one
person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows). In
this way, when a call with the specific ring frequency is
received, the fax machine (in "PHONE/FAX RX" and "TAD/
FAX RX" reception modes) prepares exclusively to re-
ceive a document.
This function is particularly useful when associated
with silent reception in that the fax machine will only ring
if the call is coming from a telephone.
For the model with a built-in TAD, we recommend you
disconnect the TAD before carrying out the recognition
procedure.
Until the display shows:
INSTALLATION
Until the display shows:
DISTINC.RING:OFF
or
DISTINC.RING:ON
to return the fax