Olivetti Fax-Lab 200 Instruction Manual page 15

For example, to enter the name "LARA":
Until you have selected the letter "L".
Until you have selected the letter "A".
Until you have selected the letter "R".
Until you have selected the letter "A".
To confirm the name. The display shows:
TYPE YOUR NUMBER
To set your fax number
Enter your fax number.
To enter a space, press |/}.
If you make any typing errors, correct them in the same
way as for your name.
If you want to include the international code in your number,
instead of the zeros, press the * key; the display will show
the symbol +.
To confirm the fax number. The display shows:
PUBL.LINE (PSTN)
To set it up for the type of line
At this point, you can connect the fax machine to a public line
or a private line:
follow either of the procedures described below and, hav-
ing completed it, continue setting up the fax machine starting
from the step at which the display shows: "OTHER
CARR.:ON".
To connect it to a public line:
The display shows:
PSTN DIAL:TONE
The dialling mode is a characteristic parameter of the
exchange that manages the line on which you have con-
nected the fax machine:
• pulse dialling, also called decadic; each number di-
alled emits a corresponding number of pulses.
• tone dialling, also called multifrequency; each number
dialled emits a sound with a specific tone different from that
emitted by the other keys.
You must therefore set the correct parameter on the fax
machine: if in doubt about the choice to be made, ask the
telephone network manager.
Press |/} to display the other dialling mode: "PSTN DIAL:
PULSE".
To connect it to a private line (PBX)
To connect the fax machine to a private line and be able to
use it also on a public line, proceed as follows:
• Select the "PBX" parameter.
• Set the same dialling mode (tone or pulse) as the one
used by the private telephone exchange that manages the
line to which you have connected the fax machine. If in
doubt about the choice to be made, ask the company that
manages your private telephone network.
• Set the output mode (area code or flash) to access the
public telephone network from the private telephone net-
work.
• Set the same dialling mode (tone or pulse) as the one
used by the public telephone exchange.
Press |/} to view the other available option:
PRIV.LINE (PBX)
The display shows:
PBX DIAL:TONE
Press |/} to view the other dialling mode:
PBX DIAL:PULSE
To confirm your choice.
EXT.LINE:PREFIX
Press | /} to view the other available option:
"EXT.LINE:FLASH".
If you confirmed the "EXT.LINE:PREFIX" mode, the fax
machine prompts you to enter the number corresponding to
the area code (max. 3 digits).
The display shows:
PSTN DIAL:TONE
Press |/} to view the other dialling mode:
PSTN DIAL:PULSE
n o t e
Having confirmed the dialling mode to be used by the fax
machine to connect to the public line, simply press the
key, before dialling the correspondent's fax or telephone
number, to gain access to it. The display will show the letter
"E" (external).
To confirm the connection to the public line or private line.
The display shows:
OTHER CARR.:ON
To automatically dial a frequently used code
This parameter enables you to store a frequently used
code such as an area code or a code to access an
alternative telephone operator which is to be dialled
automatically by the fax machine.
If you do not want to enable this parameter, press |/} to
display the alternative option: "OTHER CARR.:OFF" then
press the key; then resume the procedure starting
from the point where the display shows: "REMOTE
START:ON".
The display shows:
ENTER NAME:
7