Olivetti Fax-Lab 200 Instruction Manual page 19

If you want, change the contrast and resolution values as
described previously.
Until the display shows:
DELAYED TX
The display shows:
TYPE TIME
HH:MM
Enter the time at which you want to send the document. For
exemple "16:50".
The display shows:
TYPE FAX NUMBER
NUM/TOUCH/SPEED
Dial your correspondent's number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys or speed dialling codes (see "To set one-touch
and speed dialling").
To confirm the setting. The display shows:
AUTOMATIC RX OO
TX AT
n o t e
You can delete the "broadcast transmission" setting by re-
moving the document from the ADF or pressing the
T /
O CHANGE DELETE A BROADCAST TRANSMISSION THAT IS
ALREADY SET
Until the display shows:
DELAYED TX
The display shows:
ALREADY ENTERED
The display shows:
CHANGE PARAM.?
If you want to delete the transmission set, press the
|/} keys: the display shows the message "CANCEL SET-
TING?", then press
machine automatically returns to the initial stand-by mode.
If you want to change the time at which the document is to be
sent or the number of the correspondent to whom you want
to send the document, take the following steps:
The display shows:
TYPE TIME
16:50
16:50
key.
to confirm deletion. The fax
Overwrite with the new time and then confirm the setting by
pressing the key or confirm the existing time by press-
ing the key. The display shows:
TYPE NUMBER
If you want to restore the current time, press the
the key straight away.
Overwrite with the new number and confirm the setting by
pressing the key or confirm the existing one by press-
ing the key straight away. The display shows:
RX AUTOMATICA 00
TX ORE
T
O SEND A DOCUMENT TO SEVERAL CORRESPONDENTS
The fax machine's memory allows you to send a document (even
at a preset time: "Delayed transmission") to several correspond-
ents (max. 10): "Broadcast transmission". See "To send a docu-
ment from the memory".
T
O SEND A DOCUMENT FROM THE MEMORY
Place the document in the ADF. The display shows the
default contrast and resolution values: NORMAL and
(standard), respectively.
If you want, change the contrast and resolution values as
described previously.
The display shows:
TX FROM MEMORY
The fax machine starts to save the document. Once saved,
the display shows the message "DOC.N. XXXX" and then:
TYPE TIME
Enter the time at which you want to send the document , for
exemple "16:50", then press the
key straight away to confirm the current time. The
display shows:
TYPE FAX NUMBER
NUM/
Dial your correspondent's number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys or speed dialling codes (see "To set one-touch
and speed dialling").
18:00
HH:MM
key or press the
/
key,
11