Guest Network Settings - EnGenius EnStationACv2 User Manual

Guest Network Settings

Adding a guest network when EnJet disable allows
visitors to use the Internet without giving out your office
or company wireless security key. You can add a guest
network to each wireless network in the 5 GHz ac/a/n
frequencies.
SSID:Specifies the SSIDfor the current profile.
Suppressed SSID: Check this option to hide the SSIDfrom
clients.Ifchecked,theSSIDwillnotappearinthesitesurvey.
Station Separation: Click the appropriate radio button to
allow or prevent communication between client devices.
IP Address: The IP Address of this device.
Subnet Mask: The IP Subnet mask of this device.
Starting IP Address: The first IP Address in the rangeof
the addresses by the DHCP server .
Ending IP Address: The last IP Address in the range of
addresses assigned by theDHCP server .
RSSI Threshold
RSSI Threshold: Enable the Fast Handover feature when
EnJet disable by ensuring that each client is served by at
least one Access Point at any time. Access Points
continuously monitor the connectivity quality of any
client in their range and efficiently share this information
with other Access Points in the vincinity of that client to
coordinate which of them should serve the client best.
RSSI: Enter the RSSI (Received Signal Strength Index) in
order to determine the handover procedure which the
current wireless link will terminate. RSSI is an indication of
the power level being received by the antenna. Therefore,
the higher the RSSInumber , the stronger the signal.
49