Fast Roaming - EnGenius EnStationACv2 User Manual

Radius Settings
NAS-ID: Enable or disable accounting feature.
NAS-Port: Enable or disable accounting feature.
NAS-IP: Enable or disable accounting feature.
Radius Accounting
Radius Accounting: Enable or disable accounting feature.
Radius Accounting Server: Enter the IP address of the
Radius accountingserver .
Radius Accounting Port Enter the port number used for
connections to the Radius accounting server .
Radius Accounting Secret: Enter the secret requiredto
connect to the Radius accounting server .
Interim Accounting Interval: Specifies how often, in
seconds, theaccounting data sends.
Note: 802.11n does not allow WPA2-PSK TKIP security
mode. The connection mode will automatically change
from 802.11n to802.11g.

Fast Roaming

Enable the function to serve mobile client devices that roam
from Access Point to Access Point. Someapplications running
on Client devices require fast re-association when they roam
to adifferent AccessPoint
Pleaseenterthesettingsof theSSIDandinitializetheSecurity
modeto WPA2 enterprise, as well as to set the Radius Server
firstly. Users can enable the Fast Roaming and implementthe
advancedsearch.
Please also set the same enterprise Encryption under the
same SSID on other Access Points and enable the Fast
Roaming. When the configuration is realized on different
Access Point, the mobile client devices can run the voice
service and require seamless roaming to prevent delay in
conversation from Access Point to Access Point.
46