Wireless Macfiltering - EnGenius EnStationACv2 User Manual

Wireless MACFiltering

Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones, etc.) according to their MAC addresses. You
can manually add a MAC address to restrict permission to
access the AP/CPE.The default setting is:Disable Wireless
MAC Filter.
Note: Only applicable in Access Point and WDSAP
modes.
ACL Mode: Determines whether network access is granted
or denied to clients whose MAC addresses appear in the
MAC address table on this page. Your choices are: Disabled,
Deny MAC in the list, or Allow MAC in the list.
MACAddress:Enterthe MACaddressof the wirelessclient.
Add: Click Add to add the MAC address to the MAC address
table.
Delete: Delete the selected entries.
Save: Click Save to apply the changes.
47