How To Establish Horizontal Markers - Simrad ES70 Operator's Manual

Simrad ES70
3 On the
Echogram
Note
The chosen echogram type will only apply to the currently selected "active"
echogram. If you wish the changes to apply to all similar echograms, click
.
To All
4 Click to save the current settings and close the dialog.
OK

How to establish horizontal markers

The echograms provided by the ES70 may contain additional information. The following
lines, markers and annotations can be enabled:
• Bottom line on page 54
• White line on page 54
• Hardness line on page 55
• Trawl line on page 55
• Variable depth line on page 56
• Range other lines on page 56
• Biomass line on page 57
• Range scales on page 57
• Vertical ticks on page 57
• Annotations on page 58
This procedure explains how you can enable one or more horizontal markers in the
current echogram.
1 Click the
Active
→ Active menu on page 107
2 Click
Echogram
3 On the tab, observe the various markers that can be enabled.
Lines
4 Enable the lines you wish to see.
Note that the White Line and the Hardness Line can not be used simultaneously.
5 Click to save the current settings and close the dialog.
OK
84
tab, choose
Echogram Type
icon under the menu to open the
Main
to open the
Echogram
.
Active
dialog.
Apply
menu.
343539/B