Simrad ES70 Operator's Manual page 41

How to select a parameter using a sub-menu
Click the middle section of the button to open a sub-menu, then click the requested
1
parameter value.
The chosen value is applied, and the sub-menu is automatically closed.
Whenever applicable, you can also access the sub-menu by clicking the left and
2
right side of the button, but this method will not show you the menu choices.
a Click on the left side of the button to select a lower sub-menu choice.
b Click on the right side of the button to select a higher sub-menu choice.
How to select parameters using a dialog
Click anywhere on the button to open a separate dialog.
1
343539/B
Getting started
39