Simrad ES70 Operator's Manual page 47

In order to open an information pane, you must first click in an echogram presentation to
make it "active". By doing this you select frequency channel (transducer). In most cases,
the data in the information pane you open will only be valid for the selected echogram.
Some of the information panes are optional. They are thus not available for use unless a
licence code is available. In order to obtain a licence, consult your local dealer.
Depth
Click this icon to open and close the
provides the current depth as measured by the selected transducer.
→ Depth information pane on page 59
Biomass
Click this icon to open and close the
provides the current biomass as calculated by the echo sounder based on
the current echogram.
Note that biomass is an optional function. In order to activate the
pane, you must obtain a software licence.
→ Biomass information pane on page 59
Bottom Hardness
Click this icon to open and close the
pane provides the bottom hardness in the current echogram.
Please note that bottom hardness is an optional function. In order to activate
the line and the
Hardness
→ Bottom Hardness information pane on page 60
Colour Scale
Click this icon to open and close the
shows you the colours you are presently using in your echogram presentation.
You can also manually modify the colour scale to filter out weak echoes.
→ Colour Scale information pane on page 60
Size Distribution
Click this icon to open and close the
pane shows you the size of the fishes currently located in your transducer beam.
The
Size Distribution
equipped with one or more split beam transceivers.
→ Size Distribution information pane on page 62
343539/B
information pane, you must obtain a licence.
Bottom Hardness
information pane is only available if your ES70 is
information pane. This pane
Depth
information pane. This pane
Biomass
Biomass
information pane. This
Bottom Hardness
information pane. This pane
Colour Scale
information pane. This
Size Distribution
Display views
information
45