Simrad ES70 Operator's Manual page 101

This procedure explains how to change the pulse length (duration).
Click the
1
Operation
→ Operation menu on page 104
2 Click
Normal Operation
This dialog is used to define various parameters associated with the transceiver.
These settings include transceiver mode, the depth of the transducer surface, the
transmit power, and the pulse duration. Note that this dialog is not available in
Replay mode.
For the relevant transducer channel, set
3
For general use, we recommend that the pulse duration is set to Auto.
→ About pulse duration on page 113
Click to save the current settings and close the dialog.
4
OK
343539/B
icon under the menu to open the
Main
to open the
Normal Operation
Pulse Length
Operational procedures
sub-menu.
Operation
dialog.
to requested value.
99