Table of Contents
Advertisement
W-562
Always depressurize
the entire system,
disconnect all power
sources and lockout/
tagout all components
before any maintenance
or troubleshooting is
attempted. Failure to
comply with the above
warning could cause
electrical shock and
inadvertent activation of
equipment resulting in
death or serious injury.
W-586
Moving parts can
present an area where
crushing, pinching,
entanglement or
amputation may occur.
Do not place body parts
or foreign objects in any
area where there are
moving parts. Failure to
comply with the above
warning could result in
death or serious injury.
MAINTENANCE
Adjust Discharge Auger Drive Chain
1) Close Ball Valves (1).
2) Remove three Bolts and Washers (2) and
Cover (3).
3) Loosen four Nuts (4) from Sliding Motor
Mount (5).
4) Move Hydraulic Motor to set Chain (6)
deflection to approximately 3/16 - 1/4 inch.
Tighten bolts of Hydraulic Motor.
5) Install parts in reverse order.
1
Dustmaster
28,000 CFM Tier 4 Diesel Dust Collectors
®
2
4
5
6
1
3
24
Advertisement
Table of Contents
