Extra Parts - Honeywell CIPer 50 Installation & Commissioning Instructions

EXTRA PARTS

A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B2 B3 B4 B5 B6 B7 B8 B9
A1 B1 A2 B2 A3 B3 A4 B4 G1 A5 B5 A6 B6 A7 B7 A8 B8
CIPer MODEL 50 CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
Table 18. Extra parts
order no.
XS830
XS831
G2
TPU-11-01
TPU-45-01
MVC-80-AC1
MVC-80-AC2
MVC-40-AC3
Set of ten terminals. Each package consists of two groups of
nine internally connected push-in terminals, for distributing
signals / power.
Set of ten terminals. Each package consists of two groups of
four pairs of push-in terminals (each with a 499 Ω resistor),
for converting 0...20 mA signals into 0...10 VDC signals, and
one push-in ground terminal per group.
Removable terminal plugs, push-in type; complete set of 3
plugs (for terminals 1, 2, 24-32); for the WEB-EAGLENX26.
Removable terminal plugs, push-in type; complete set of 9
plugs (for terminals 1 - 47); for the WEB-EAGLENX26.
Terminal cover (color: RAL9011); package of ten.
Front door mounting accessory (color: RAL9011); package of
10.
Strain relief; package of ten.
25
description
31-00233EFS-01