Index - Honeywell CIPer 50 Installation & Commissioning Instructions

INDEX

accuracies see sensor input accuracies
BACnet
BACnet MS/TP via RS485-1 6
BACnet MS/TP via RS485-2 6
BACnet IP 2
LED 7
BACnet MS/TP 2
BACnet MS/TP via RS485-1 8, 36, 37, 38, 41
BACnet MS/TP via RS485-2 8
disposal
WEEE Directive 2002/96/EC 2
Ethernet / RJ45 sockets 6
details 7
protocol version 2
External HMI
power consumption 3
extra parts
TPU-11-01 removable push-in terminal plugs 20
TPU-45-01 removable push-in terminal plugs 20
fusing 20
LEDs 6
L1 8, 45
L2 8, 46
power LED 8, 45
Rx 8, 46
status LED 8, 45
Tx 8, 46
M-Bus
connection 42
Modbus
connection 10, 39
via RS485-1 8, 40
via RS485-2 8, 41
Manufactured for and on behalf of the BMS Division of Honeywell Products and Solutions Sàrl, Z.A. La Pièce 16, 1180 Rolle, Switzerland by its Authorized
Representative
The material in this document is for information purposes only. The content and the product described are subject to change without notice. Honeywell makes
no representations or warranties with respect to this document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this
document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this document. No part of this document may be
reproduced in any form or by any means without prior written permission from Honeywell.
Honeywell
1985 Douglas Drive
Golden Valley MW
For more information: www.customer.honeywell.com
CIPer MODEL 50 CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
Panel Bus
connection 30
via RS485-1 8
via RS485-2 8
power supply
failure indication 45
power supply (field devices)
cable specifications 34
via I/O module 20, 21
power supply (Panel Bus I/Os)
cable specifications 33
RS232 / RJ45 socket 6, 7, 42
safety
electrical safety as per EN60204-1 47
general safety information 2, 20
PELV 47
SELV 47
safety values/positions
safety positions of AOs 25
safety positions of relays 26
safety values of sensor inputs 49
sensor characteristics
NTC 20 kOhm 50
sensor input accuracies 24, 49
AOs 25
UIs 24
USB
USB 2.0 Device Interface 6
USB 2.0 Host Interface 6
© 2019 Honeywell, Inc.
31-00233EFS | I.C.I | Rev. 01-19
multiple rails, single transformer 31, 32
details 7
initially accessing CIPer Model 50 via Ethernet/IP
27
details 7