Table of Contents
Advertisement
Controlling the projector remotely through a
web browser
This function is not available when the broadcasting function is activated.
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to control
the projector.
•
Make sure you are using Microsoft Internet Explorer version 7.0 or 8.0.
•
The screenshots in this manual are for reference only, and may differ from the actual design.
1.
Enter the address of the projector in the address bar of your browser and press
Enter.
2.
The main page of the Projector Network Display System appears. This web page
provides access to a variety of functions with a simple click.
3.
Click Download to save QPresenter software on your computer. See
QPresenter" on page 5
for details.
Controlling the projector remotely through a web browser
"Installing
9
Advertisement
Table of Contents
