Setting Immediate Ring Enable; Revertive Ringing; Teen Ringing Tables; Distinctive Ringing Tables - Nortel DMS-100 Series General Description Manual

cards on the appropriate PM and by using SERVORD to affect the changes. A
description of SERVORD is in the SERVORD Reference Manual.

Setting immediate ring enable

Immediate ring enable can be enabled or disabled by setting parameter
IMMEDIATE_RING_ENABLE in table OFCENG to Y (yes) or N (no).
Instructions on setting parameter IMMEDIATE_RING_ENABLE can be
found by referring to Office Parameters Reference Manual.

Revertive ringing

Revertive ringing on multi-party lines can be enabled or disabled, or allowed
for 4-party, superimposed, and operator number identification (ONI) by office
parameter REVRING in table OFCENG. Office parameter REVRING is
described in the Office Parameters Reference Manual.

Teen ringing tables

The following tables must be datafilled in order to activate teen ringing.
•
•
•
•

Distinctive ringing tables

The following tables must be datafilled in order to activate distinctive ringing.
•
•
•
•

Table OFCOPT

To enable distinctive ringing, office parameter DSR_OFFICE in table
OFCOPT must be set to Y (yes).
Table CUSTSTN
Table CUSTSTN identifies the options associated with the types of Meridian
Digital Centrex calls receive distinctive ringing. For each type of call to receive
distinctive ringing, datafill in table CUSTSTN the options associated with the
call type.
CLLI
STN
LENFEAT
DN
Instructions for datafilling these tables to activate the teen ringing feature
can be found by referring to feature package NTX219 in the Translations
Guide.
OFCOPT
CUSTSTN
LMRNG
LCMINV
DMS-100 Family DMS-100 Ringing System BASE15 and up
Administration of DMS ringing 4-7