Table of Contents
Advertisement
Control Panel/Remote Receiver
F
G
H
I
Figure 4. Control panel functions.
F.
Timer Indicator: Illuminates to display auto
shut-down time set by TIMER Button, or
TIME Button on remote controller. If not
illuminated, timer function is inactive, and
machine will run continuously until manually
turned OFF.
G. Remote Signal Indicator: Flashes when
remote is ready to be reprogrammed.
H. Set Button: Used to reprogram receiver.
I.
POWER Switch: Turns machine power ON
or OFF.
J.
Run Indicator: Illuminates when dust collec-
tor is ON.
K. Circuit Breaker/Thermal Overload: Pops
out if machine overloads. Press to reset.
L.
Power Indicator: Illuminates when there is
power to machine.
M. Timer Button: Selects auto shut-down time.
By pressing TIMER Button once, dust collec-
tor will run for 1 hour; 1H illuminates on Timer
Indicator. Consecutive pushes increase oper-
ation time in 1, 2, 4, or 8 hour intervals—up to
15 hours. The machine will stop once set time
period ends. To cancel timer before set time
has elapsed, turn Power Switch OFF or press
START/STOP button on remote controller.
N. ON/OFF Button: Turns dust collector ON or
OFF.
Model G0777/G0777HEP (Mfd. Since 04/19)
N
M
L
J
K
Remote Controller
O
P
Q
Figure 5. Remote controller functions.
O. TIME Button: Selects auto shut-down time.
By pressing TIME Button once, dust col-
lector will run for 1 hour; 1H illuminates on
Timer Indicator on control panel. Consecutive
pushes increase operation time in 1, 2, 4, or 8
hour intervals—up to 15 hours. The machine
will stop once set time period ends. To can-
cel timer before set time has elapsed, turn
POWER Switch OFF or press START/STOP
button on remote controller.
P. START/STOP Button: Turns dust collector
ON or OFF.
Q. SET Button: Used to reprogram receiver.
-5-
Advertisement
Table of Contents
