Grizzly G0777 Owner's Manual page 26

9. Apply foam tape to top and bottom mating
surfaces of intake barrel (see Figure 23).
Important: Apply foam tape evenly and uni-
formly to entire mating surface to prevent air
leaks. Any leaks in the system will reduce
the machine's suction capacity, causing poor
dust collection performance.
Apply Foam
Tape Here
Apply Foam
Tape Here
Figure 23. Locations to apply foam tape to
intake barrel.
10. Install intake barrel onto dust collection
assembly using (12)
(see Figure 24).
11. Install cyclone funnel onto intake barrel using
(12) ⁄ "-18 x ⁄ " hex bolts, (24)
5 3
16 4
washers, and (12)
Figure 24).
x 12
x 12
Figure 24. Intake barrel and cyclone funnel
installed (G0777HEP shown).
-24-
⁄ "-18 x ⁄ " hex bolts
5 5
16 8
⁄ " flat
5
16
⁄ "-18 hex nuts (see
5
16
Intake
Barrel
Cyclone
Funnel
12. G0777HEP Only: Install HEPA filter and
HEPA filter cage onto filter housing with (8)
⁄ "-20 x ⁄ " hex bolts and (8)
1 3
4 4
ers (see Figures 25–26).
HEPA Filter
Filter Housing
Cage
x 8
Figure 25. G0777HEP HEPA filter, cage, and
housing (filter housing shown removed for
illustration purposes).
Figure 26. G0777HEP HEPA filter system
installed.
13. Install pull handle using (4)
hex bolts and (4)
Figure 27).
Figure 27. Installing frame handle.
Model G0777/G0777HEP (Mfd. Since 04/19)
⁄ " fender wash-
1
4
HEPA Filter
⁄ "-18 x
5
16
⁄ " fender washers (see
5
16
x 4
Handle
⁄ "
3
4