Omron E5*D Series Connection Manual page 39

9.1.2. SendCmd Instruction and Send/Receive Messages
The following describes the function block for sending a command (hereinafter referred to as
"the SendCmd instruction") and the general operation of sending/receiving a message.
Additional Information
For details on the SendCmd instruction, refer to Serial Communications Instructions in
Section 2. Instruction Descriptions of the NJ/NX-series Instructions Reference Manual
(Cat.No. W502).
●SendCmd instruction
Name
Send
SendCmd
Command
●SendCmd instruction argument data
Function block
The SendCmd instruction uses a Serial
Gateway and sends a command to SCU.
9．Program
Description
36