7.3.3.
Checking the Parameters and Building Programs
Check the parameters of the Serial Communications Unit, execute the program check on the
project data, and build the project programs.
1
Double-click CPU/Expansion
Racks under Configurations
and Setup in the Multiview
Explorer.
2
The CPU/Expansion Racks Tab
Page is displayed in the Edit
Pane.
Select Serial Communications
Unit as shown on the right.
The setting values of
CJ1W-SCU42 are displayed.
Check that the device name is
J01 and that the unit No. is 0.
*If the setting values are
different from the above,
change the values.
Click Edit Special Unit
Settings.
3
The 0 [Unit 0] : CJ1W-SCU42
(J01) Tab Page is displayed.
Select Port1: Serial Gateway
Settings from the pull-down list
of Parameter group to show.
7.Serial Communications Connection Procedure
19