7
Double-click Task Settings
under Configurations and
Setup in the Multiview Explorer.
8
The Task Settings Tab Page is
displayed in the Edit Pane.
Click the Program Assignment
Settings Button. Check that
Program0 is set in the Primary
Task Field and that Run is set as
the initial status.
9
Select Check All Programs
from the Project Menu.
10
The Build Tab Page is displayed.
Check that "0 Errors" and "0
Warnings" are displayed.
11
Select Rebuild Controller from
the Project Menu.
12
A confirmation dialog box is
displayed. Check the contents
and click Yes.
13
Check that "0 Errors" and "0
Warnings" are displayed on the
Build Tab Page.
7.Serial Communications Connection Procedure
21