Omron E5*D Series Connection Manual page 25

7.3.4. Going Online and Transferring the Project Data
Go online with Sysmac Studio and transfer the project data to the Controller.
Always confirm safety at the destination node before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from Sysmac Studio. The devices or machines may
perform unexpected operation regardless of the operating mode of the CPU
Unit.
Always confirm safety before you reset the Controller or any components.
1
Turn ON Controller and Digital
Temperature Controller.
2
Select Change Device from the
Controller Menu.
3
The Change Device Dialog Box
is displayed.
Check that the Device and
Version Fields are set as shown
on the right.
Click Cancel.
*If the settings are different,
select the setting items from
the pull-down list, and click OK.
4
Select Communications Setup
from the Controller Menu.
7．Serial Communications Connection Procedure
22