Omron E5*D Series Connection Manual page 10

5．Applicable Devices and Device Configuration
Additional Information
For information on the serial cable (RS-485), refer to 3-3 RS-232C and RS-422A/485 Wiring
of the CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit (Cat.
No. W494).
Additional Information
The system configuration in this guide uses USB for the connection between the personal
computer and the Controller. For information on how to install the USB driver, refer to A-1
Driver Installation for Direct USB Cable Connection of the Sysmac Studio Version 1
Operation Manual (Cat. No. W504).
7