Switching to Static IP
on the Computer
To communicate with the Gateway from a computer on the network (to access
the Web Configuration screens, for example), the user may have to switch the
address settings from
Gateway are on the same subnet.
To set up static
instructions.
☞
Windows 98 SE
1. From the desktop, click Start in the lower left corner.
2. From the menu that appears, select Settings.
Downloaded from
www.Manualslib.com
-enabled to static
DHCP
on a computer, select the operating system and follow the
IP
Note: The following procedures are based on the Gateway's
factory default
address. If the Gateway's
IP
changed, enter the new
address.
IP
manuals search engine
, so that the computer and the
IP
address has been
IP
address when instructed to enter an
IP
85
B
IP