Changing Payment Card Settings; Adding A Payment Card - VeriFone CCV Smart VX 820 User Manual

5.2

Changing payment card settings

The table below lists the various changes you can make to the payment card settings, and the
information you need to make each change. The table also states the subsection in this document where
you can find detailed instructions on carrying out the change concerned.
Change
Accepting a payment card
Terminating acceptance of a
payment card
Allocating a payment card to a
different acquirer while retaining
the current transaction processor
Allocating a payment card to a
different acquirer and a different
transaction processor
5.2.1

Adding a payment card

Important: You need the Merchant ID for the payment card in order to carry out this change. You also
need to know which transaction processor will process the transactions. If you do not have this
information at your disposal, please contact your acquirer.
Complete the following steps to add a payment card:
Vx570 screen
OTHER TRX
01.06.12
MAIN MENU
DISPLAY INFO
MERCHANT MENU
SERVICE MENU
PROTECTED ITEM
MERCHANT PASSWORD:
_ _ _ _ _
MERCHANT MENU
CONFIGURE
CID086A/03012013
Required information
•
•
You do not need any specific information to
make this change.
•
•
•
•
Step
1
Press the purple function key below the
SALE
the menu.
2 Select MERCHANT MENU.
3
Enter the merchant password (the default password is 99999)
and confirm by pressing <OK>.
REPORTS
4 Select CONFIGURE.
FUNCTIONS
CONFIGURE
TERMINAL
5 Select C-TAP.
C-TAP
Merchant ID of acquirer
Transaction processor
(CCV, Equens or Atos Worldline)
Merchant ID of acquirer
Current transaction processor (CCV,
Equens or Atos Worldline)
Merchant ID of acquirer
New transaction processor (CCV,
Equens or Atos Worldline)
Subsection
5.2.1
5.2.2
5.2.3
5.2.1
symbol to open
Page 32 of 54