Download
Share
Print this page
Tripp Lite DWM1327SP Owner's Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. Racks & Stands
  5. DWM1327SP
  6. Owner's manual

Tripp Lite DWM1327SP Owner's Manual

Full motion flat screen wall mount
Hide thumbs

Advertisement

Quick Links

Download this manual
Flat Screen Wall Mount
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!
75x75
100x100
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
14-04-242-93332C.indd 1
Owner's Manual
Full Motion
MODEL: DWM1327SP
Tripp Lite по адресу: www.tripplite.com
Copyright © 2014 Tripp Lite. All rights reserved.
27"
MAX
1
15 kg
(33 lbs)
5/7/2014 5:01:20 PM

Advertisement

loading

Related Manuals for Tripp Lite DWM1327SP

Summary of Contents for Tripp Lite DWM1327SP

  • Page 1 Owner’s Manual Full Motion Flat Screen Wall Mount MODEL: DWM1327SP CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 27” 75x75 15 kg 100x100 (33 lbs) Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com...

  • Page 2: Warranty & Warranty Registration

    NOTE: Read the entire instruction manual before you start installation and assembly. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support.

  • Page 3: Component Checklist

    Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. Wrench (x1) 4mm Hex Key (x1) 6mm Hex Key (x1) DWM1327SP Package M M4X14 (x4) M5X14 (x4) D5 Washer (x4)
  • Page 4 1. Separate VESA Plate from Wall Mount • Using the supplied wrench, loosen the two Remove VESA plate. upper knobs • Remove both lower knobs 2. Remove the Decorative Covers 14-04-242-93332C.indd 4 5/7/2014 5:01:21 PM...
  • Page 5 3a. Mount on Wood Stud Wall Find a wood stud location for mounting the wall mount Mark the exact location of the mounting holes Drill pilot holes Anchor Bolt Screw the wall mount onto the wall WARNING • Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is highly recommended.
  • Page 6 3b. Mount on Solid Brick and Concrete Block Mark the exact location of mounting holes Drill pilot holes Concrete Anchor Anchor Bolt Screw the wall mount onto the wall WARNING • When installing wall mounts onto a concrete masonry unit (also known as a CMU or “cinder block”), verify that the actual concrete thickness is at least 35mm (1-3/8”) in order to hold the concrete anchors.
  • Page 7 4. Install Decorative Covers 5. Install VESA Plate Top of Display 14-04-242-93332C.indd 7 5/7/2014 5:01:23 PM...
  • Page 8 5. Install VESA Plate M4X14 / M4X14 / M5X14 M5X14 D5 Washer D5 Washer Note: Firmly secure the VESA plate to the display using the appropriate screws, washers and spacers (if necessary). Do not over-tighten screws. 14-04-242-93332C.indd 8 5/7/2014 5:01:24 PM...
  • Page 9 6. Hook the TV onto the Wall Mount Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate. Set the VESA plate’s upper thumbscrews over the top flange of wall plate arm. Make sure the VESA plate’s lower screws fit inside of the wall plate arm’s lower holes.

  • Page 10: Tension Adjustment

    7. Tension Adjustment 6mm Hex Tighten the socket screw if the arm assembly’s joints make popping sounds during adjustment. Keep the wall mount arm level during tension adjustment. You may need to slightly loosen or tighten the adjustment screw using the provided Hex Keys depending on the weight of display installed. If display settles on its own, rotate adjustment screw towards the “+”...
  • Page 11 9. Adjustment Hex Key 180° To correct the tilting angle, tighten the adjustment screws using the provided Hex Key (or tighten the +2° -2° knob). +15° -15° 180° 180° Adjust to the desired location or tilt. Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). •...
  • Page 12 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 14-04-242 93-332C_RevA 14-04-242-93332C.indd 12 5/7/2014 5:01:33 PM...