Extended reach wall-mount monitor arm with antimicrobial tape (12 pages)
Summary of Contents for Tripp Lite DWM1737MN
Page 1
(115lbs) Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. 4mm Allen Key (x1) DWM1737MN (x1) Package M M4X14 (x4) M5X14 (x4) M6X14 (x4)
Page 4
1. Separate the VESA Plate from the Wall Mount 2a. Mount on Wood Stud Wall Find and mark the exact location of mounting holes Drill pilot holes D6 Washer Anchor Bolt Screw the wall plate onto the wall WARNING • Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is highly recommended.
Page 5
2b. Mount on Solid Brick and Concrete Block Find and mark the exact location of mounting holes Drill pilot holes D6 Washer Concrete Anchor Anchor Bolt Screw the wall plate onto the wall WARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8”...
Page 6
3. Install VESA Plate M4X14 / M5X14 M6X14 / M8X20 D5 Washer D8 Washer Top of TV M8X20 D5 Washer Small Spacer Top of TV M8X20 D5 Washer Small Spacer Small Spacer Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen. Screw VESA plate onto the TV.
Page 7
4. Hang TV onto the Wall Plate • Level the TV. • Reattach the lower flat nut (removed in step 1) and tighten both nuts. 13-09-231-9332A1-EN.indd 7 10/31/2013 11:50:20 AM...
Page 8
5. Adjustment 4mm Allen Key Because the weight of displays vary, it is necessary to slightly tighten or loosen the adjustment screw with the supplied Allen Key. 80° +15° -15° -4° +4° Adjust to the desired location or tilt. Maintenance •...