Page 1
(77lbs) Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. Top and Bottom Covers (x2) Mounting Template (x1) Middle Cover (x1) Cable Cover (x1) Arm Assembly Cable Clip (x1)
Page 4
1. Separate VESA Plate from Wall Mount loosen remove 2a. Mount on Wood Stud Wall Find and mark the exact location of mounting holes With the up arrow of the template pointing upward Drill pilot holes D6 Washer Anchor Bolt Screw the wall plate onto the wall...
Page 5
2b. Mount on Solid Brick and Concrete Block Find and mark the exact location of mounting holes With the up arrow of the Drill pilot holes template pointing upward Anchor Bolt Concrete Anchor D6 Washer Screw the wall mount onto the wall WARNING •...
3. Install Covers Insert both top and bottom covers. Finally, install the middle cover. 4. Install VESA Plate Top of Display 13-09-227-9332A7-EN.indd 6 10/31/2013 9:52:51 AM...
Page 7
4. Install VESA Plate M4X14 M5X14 M6X14 M8X20 D5 Washer D8 Washer M8X20 D8 Washer Small Spacer M8X20 D8 Washer Small Spacer Small Spacer Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen. Screw the VESA plate onto the display. Tighten all screws but do not over tighten.
Page 8
5. Hook the Display onto the Wall Mount · Position the display level. · Reattach the lower thumbscrew (removed in step 1); tighten both thumbscrews. 13-09-227-9332A7-EN.indd 8 10/31/2013 9:52:52 AM...
6. Cable Management Attach cable clip to the arm using the provided screw. Cable Clip Cable Cover M4X5 Connect cables to your display and route cables through cable clip, then attach the cable cover to hold the cable in place. Note: Leave slack in cable for cantilever arm movement.
Page 10
7. Adjustment 180° 180° -3° +3° +15° -15° Adjust to the desired location or tilt. Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). • Please visit www.tripplite.com/support if you have any questions. 13-09-227-9332A7-EN.indd 10 10/31/2013 9:52:53 AM...