Fluke CableAnalyzer DSP-4000 Series Getting Started Manual page 15

Item Feature
5
LIA connector and latch
6
Pass LED
7
Test LED
8
Fail LED
9
Talking LED
0
Low-battery LED
f
X
TALK
g
Rotary switch
Table 3. Remote Connectors and Features (cont.)
Connector and latch for attaching link interface adapters.
A green LED that turns on at the end of a test if no faults were detected.
A yellow LED that turns on when a test is in progress.
A red LED that turns on at the end of a test if one or more faults were detected.
A LED that turns on when the Talk mode is active.
A LED that turns on when the remote battery voltage is low.
Lets you use the headset for two-way voice communication over twisted pair or fiber
cable. When the Talk mode is active, this button controls the headset volume.
On/off switch for remote.
Description
Remote Features
11