Fluke CableAnalyzer DSP-4000 Series Getting Started Manual page 11

Item Feature
A
Rotary Switch
B
T
F
C
D e
E !@
#$
F
Display
G L R U D
C
H
I V
J S
K E
L
LIA connector
and latch
M
RS-232C
serial port
N
2.5 mm phone
jack
Table 2. Main Unit Features
Selects the test tool's modes.
Starts the highlighted test or restarts the test last run.
Automatically provides more specific information on the cause of an Autotest failure.
Exits the current screen without saving any changes you made.
Provide functions related to the concurrent display. Softkey functions are shown in the
display area above the keys.
A LCD display with backlight and adjustable contrast.
Allow left, right, up, and down movement on the display. Increase or decrease the numerical
values of user-definable parameters.
Controls the display backlight. Pressing for 1 second allows adjustment of the display
contrast. Reactivates the test tool when the tool is in power down mode.
Lets you use the headset for two-way voice communication over twisted pair or fiber cable.
Saves Autotest results and parameter changes in memory.
Selects the highlighted item from a menu.
Connector and latch for the link interface adapters (LIAs).
A 9-pin connector for interfacing with a printer or host computer via a standard IBM-AT EIA
RS-232C serial cable.
Connection for the headset supplied with the test tool.
Description
Main Unit Features
7