Fluke CableAnalyzer DSP-4000 Series Getting Started Manual page 14

DSP-4000 Series
Getting Started Guide
Item Feature
1
RS-232C serial port
2
2.5 mm phone jack
3
AC adapter/
charger jack
4
AC power indicator
10
Table 3. Remote Connectors and Features
A DB9P connector for loading software updates.
Connection for the headset supplied with the test tool.
Connection for the ac adapter/charger supplied with the test tool.
LED off, Battery is not charging.
unit turned off The charger is not plugged in.
LED off, Battery is not charging.
unit turned on The charger is not plugged in or the test tool is running a test. When
the test is finished, charging resumes unless the battery is already
charged (>80%).
LED flashing red Fast charge pending.
Charging is beginning. This state may last for several minutes until
fast charging begins.
LED steady red Fast charge.
The unit stays in fast charge mode for up to 4 hours, or until either
the battery is fully charged or a test is initiated.
LED steady Charge complete.
green Fast charge is complete. The unit enters trickle charge mode.
Description