Fluke CableAnalyzer DSP-4000 Series Getting Started Manual page 12

DSP-4000 Series
Getting Started Guide
Item Feature
O
AC power indicator
P
AC adapter/ charger jack
Q
Eject button (DSP-4100/4300)
R
Memory card slot
(DSP-4100/4300)
8
Table 2. Main Unit Features (cont.)
LED off, Battery is not charging.
unit turned off The charger is not plugged in.
LED off, Battery is not charging.
unit turned on The charger is not plugged in or the test tool is
running a test. When the test is finished, charging
resumes unless the battery is already charged
(>80%).
LED flashing red Fast charge pending.
Charging is beginning. This state may last for several
minutes until fast charging begins.
LED steady red Fast charge.
The unit stays in fast charge mode for up to 4 hours,
or until either the battery is fully charged or a test is
initiated.
LED steady Charge complete.
green Fast charge is complete. The unit enters trickle
charge mode.
Connection for the ac adapter/charger supplied with the test tool.
Button for ejecting the memory card.
Slot for the memory card used for saving Autotest results on a DSP-4100 or
DSP-4300 test tool.
Description