5.4.12.2
Multicasting Function
1.
2.
3.
EN/LZT 720 0027 Uen R8A 2006-06-27
Remove the protection cover
from connector TX(/RX) 2 on
the RRU and install the MCB to
it. Fasten it with the two short
screws.
Connect the first cable between
connection port TX(/RX) on the
MCB and TX(/RX) 1 on the RRU.
Cover connection port LOAD
with protection cover removed
from connection port TX(/RX) 2.
Connect the antenna cables to connection ports ANT 1 and ANT 2.
For more information about antenna connections, see:
Site Installation Documentation
RBS 2308 and RBS 2309 User's Guide
Protection cover
P010519B
73