RBS 2308 and RBS 2309 User's Guide
Figure 25
Connecting Optical Ethernet for IP-based Transmission
1. Follow the instructions in section Routing Transmission Cables in chapter
2. Continue with Section 5.4.7 Installing the GPS Solution Synchronization
Connecting Electrical Ethernet for IP-based Transmission
1. Follow the instructions in section Routing Transmission Cables in chapter
2. Continue with Section 5.4.7 Installing the GPS Solution Synchronization
5.4.7
Installing the GPS Solution Synchronization (Optional)
For information about GPS solution synchronization connections, see:
5.4.8
Installing the RRU
This section describes how to install the Remote Radio Unit (RRU).
Note: To avoid damage, do not place the RRU on its connectors, see Figure
66
Earthing Outer Shield Only
Reconfiguring the RBS for IP Transmission.
(Optional) on page 66.
Reconfiguring the RBS for IP Transmission.
(Optional) on page 66.
GPS Solution Synchronization,
Installation Instructions
below.
EN/LZT 720 0435
EN/LZT 720 0027 Uen R8A 2006-06-27
P011353A