Ericsson RBS 2308 User Manual page 32

RBS 2308 and RBS 2309 User's Guide
Overloading
Overloading, or other wrong use of lifting devices, can cause serious injury to
anyone hit by falling equipment. Do not create an angle exceeding 90° between
lifting straps as this increases the strain on them and can cause them to snap.
The equipment is heavy. Lifting the equipment without the aid of a lifting device
can cause injury.
Unsecured Equipment
Tip risk! Unsecured equipment can tip over if not secured properly, causing
injury to personnel. Secure products with a high center of gravity as soon as
possible to avoid accidents.
2.12.2 Working at Height
This section provides information about working at height.
For information on climbing instructions for working at height, see:
Safety Precautions for Working at Height
The following precautions must be observed when working at height:
•
24
Safe Climbing
Personnel have the appropriate training and medical certificate.
Warning!
Caution!
Caution!
LZY 213 715/02
EN/LZT 720 0027 Uen R8A 2006-06-27