Ericsson RBS 2308 User Manual page 62

RBS 2308 and RBS 2309 User's Guide
3.
4.
5.4.4.2 Connecting DC Supply
This section describes how to connect the DC supply cable (if applicable).
1.
2.
54
Ensure that the protective earth
is properly connected.
If DC is not to be connected, put back the MBU cover onto the MBU.
Ensure that the site power is turned off.
Connect the DC cable to the
dedicated terminals. If 2-wire is
used, set the ground selector to
2-W.
EN/LZT 720 0027 Uen R8A 2006-06-27