Ericsson RBS 2308 User Manual page 55

B
Figure 18
2. Ensure that the washers are mounted correctly and attach the two clamps
Figure 19
3. Position the wall bracket on the pole and mount the clamps, tightening
EN/LZT 720 0027 Uen R8A 2006-06-27
A
U P
B
A
Installation Alternatives
A Holes used for vertical poles
B Holes used for horizontal poles
with the screws and washers. See Figure below.
Note: Ensure that the recess is attached in the correct direction.
Fastening Clamps to the Wall Bracket
the screws alternately to avoid bending them. Ensure that the washers
are mounted correctly.
RBS 2308 and RBS 2309 User's Guide
A B
Recess
U P
P010152A
P010171A
47