Nortel 6220 User Manual page 87

88
Figure 4-26
IP setup dialog box
9. Enter an IP address that will be local to the IP of the PC/laptop
running the Configurator, and then click the OK button in Read Write
Password window.
Note: The IP address to enter should be included in the same subnet area
with PC/Laptop Computer for access to CSU.
For example, in case the IP address of Laptop computer is
192.168.0.100/24, the CSU will be allowable in 192.168.0.1/24 ~
192.168.0.254/24 as the IP address subnet group.
10. The SNMP Password dialog box is displayed, as shown below.
11. Press "Enter" key or enter a new password instead of the default
password "public" in the basic SNMP password box.
Figure 4-27
SNMP Read Write Password dialog box
12. The main window is redisplayed.
13. To setup the interface, Click on the Interface Setup button.
14. The Interface Setup screen is enabled and displayed, as shown in the
Figure 4-29
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005