Configuring TCP/IP
The SBV5422 contains all required software. You do not need to configure the SBV5422, but
you must be sure that your computer is configured for TCP/IP (a protocol for communication
between computers). Perform one of the following:
•
"Configuring TCP/IP in Windows 2000"
•
"Configuring TCP/IP in Windows XP"
•
Windows Vista: To configure TCP/IP , please consult Windows help.
•
Follow the instructions in your Macintosh or UNIX user manual
After configuring TCP/IP , perform one of the following to verify the IP address:
•
"Verifying the IP Address in Your Windows OS"
•
Follow the instructions in your Macintosh or UNIX user manual
Your cable provider may provide additional instructions to set up your computer.
on page 12
on page 13
11 —
SBV5422 SURFboard Digital Voice Modem
on page 14