FUTABA SkyLeaf BP Instruction Manual page 22

4 1
● Install Main gear with M3 x 16 Hexagon bolt
6 pieces and M3 Washer 6 pieces.
● M3 x 16 Hexagon bolt
Canopy
12
1 2
● Adhere the Canopy to the fuselage.
● Adhesion of the canopy should use elastic
silicone or rubber adhesive.
● Fix the Canopy with a Masking tape
until the adhesive is solidified.
22
● Insert screws from between
the slits of the fuselage bottom
wood plate.
is installed from above.
5
● Wheel pants on the left and right Wheel.
6
● Parallel the Fuselage and
the Wheel pants.
7 2
● Put on Wheel pants with two
M2 × 8 Tapping Screws.
W h e n s i l i c o n e
adhesive is applied
between Wheel pants
and gear, durability
improves.
If Wheel pants and wheels
interfere, cut Wheel pants.
2 2
● Peel off the masking tape when the
adhesive is fixed.